AMCOT Information
Location
Fort Worth, Texas
![texasseal[1]](https://eecap.org/wp-content/uploads/2025/01/texas20seal1.jpg)
The American Manufacturing Company of Texas (AMCOT) conducted specialized tube elongation and billet piercing tests on uranium metal for National Lead Company of Ohio (Fernald). The tube elongation tests were conducted from July to September 1961 and involved approximately 7 tons of uranium. The billet piercing tests were conducted from June to September 1962 and involved approximately 23 tons of uranium. Both NLO and AMCOT employees participated in the tests.
During the period of residual contamination, as designated by the National Institute for Occupational Safety and Health and as noted in the dates above, employees of subsequent owners and operators of this facility are also covered under the Energy Employees Occupational Illness Compensation Program Act.
Alternative Names
- American Manufacturing Company of Texas
Type of Facility
- Atomic Weapons Employer
Covered by EEOICPA
- Part B
EEOICPA Covered Years
- 1961-1962
- 1963 (residual radiation)
Did work for:
- Fernald
DOE
DOL
NIOSH
- FAQs About Your Case
- Advisory Board on Radiation and Worker Health
- AWE Site Wide Documents
- NIOSH Case Statistics
Other Resources
related posts
Falls City Uranium Mill
Location Falls City, TexaxThis uranium mill was operated from 191 to 1973 and then some processing of the tailings was performed between 1978 and 1982. These milling operations are covered under the auspices of the Radiation Exposure Compensation Act and are not...
Texas City Chemicals
Location Texas City, Texas Texas City Chemicals produced uranium by recovery of U3O8 from a phosphate fertilizer production plant. The AEC contracted with Texas City Chemicals for the recovery of uranium which was ultimately used in weapons production.During the...
Sutton, Steele and Steele
Location Dallas, TexasIn 1951, AEC and AEC contractor personnel conducted tests at Sutton, Steele, and Steele, Inc. which were aimed at devising means of recovering uranium from low grade wastes and residues. The tests were to determine the feasibility of separating...